ADSS is an alternative to OPGW with lower installation cost. The cables are designed to be strong enough to allow lengths of up to 700 meters to be installed between support towers. ADSS cable is designed to be light weight and small in diameter to reduce the load on tower structures due to cable weight, wind, and ice. In the design of the cable, the internal glass optical fibers are supported with no strain, to maintain low optical loss throughout the life of the cable. The cable is jacketed to prevent moisture from degrading the fibers. The jacket also protects the polymer strength elements from the effect of solar ultraviolet light. Using single-mode fibers and light wavelengths of either 1310 or 1530nm, circuits up to 100 km long are possible without repeaters. A single cable can carry as many as 144 fibers.
| Fiber Count | 24 | 24 |
| Cable Diameter | 12 | 12 |
| Tolerance Range(mm) | 0.5, or customized | |
| Cable Weight(kgs/km) | 200 | 185 |
Our factory outlook
Optical fiber cable production line
| Span(M) | Windspeed 10m/s | 800 |
| Windspeed35m/s | 800 | |
| Linear Expanding Coefficient(1/k) | Windspeed 10m/s | 0.02x10 |
| Windspeed35m/s | 0.11x10 | |
| Safely running strain | Windspeed 10m/s | 29680 |
| Windspeed35m/s | 19600 | |
| Temperature Range(℃） | -40~+70 | |
Feature
Loose tube, Non-metallic
High tensile strength
Long work time at electric below 25KV/m
Application
LAN, and long distance cabling
Recommended Laying Methods
Self-support
| Fiber Count | 24 | 24 |
| Cable Diameter | 12 | 12 |
| Tolerance Range(mm) | 0.5, or customized | |
| Cable Weight(kgs/km) | 200 | 185 |
