CV007 dome type fiber optic splice closure provide space and protection for fiber optic cable splicing and joint. It is made of high quality ABS material and sealed with silicon Gum material. It is water & dust proof and suitable for aerial, duct, wall-mounted or pole mounted applications. The closure can be opened and used again, no need to change the sealing material after it be sealed.
It is produced as per telecom standard YD/T 814.1-2004, suitable for optical fiber splicing in PON, FTTX etc.
Dome fiber optic splice closure outlook
Bottom(6 ports for round cable)
4 round ports+1 oval port
Protection grounding device:\
Insulation resistance: ≥2×104MΩ/500V（DC）
Withstanding Voltage: ≥15000V（DC）/1min, no breakdown, no flash over.
Extrude: Withstand ＞600N Axial tension
Squash: Withstand pressure 1500N/100mm
Shock: Withstand 16N·m, 3 times
Bending: The closure and connection between closure cover & base can withstand bending tension 150N, bending angel ±45°, 10 cycles.
CV007 has 6 round ports or 1 oval port + 4 round port (see below picture):
Structure:
1--base 2--cable fixing board 3—cable storage tray 4—fiber splice tray 5—sealing ring 6—closure body 7--hook
Aerial, pole mounted, wall-mounted, duct installation.
Plastic parts are made of high-quality anti-aging plastic, metal parts are made of high-quality rust-proof materials.
Easy installation for closure sealing & cable entry/exit sealing.
Reasonable design for fiber bending radius, enough fiber storage space.
Big storage space for fiber splice tray, rotary angel more than 90°, easy for installation & maintainance.
Can install grounding device and valve.
Long service life of up to 25 year.
IP standard: IP68
Operating temperature: -40℃
Operating temperature: -40℃～＋65℃
Storage temperature: －25℃～＋65℃
Relative humidity: ≤85%（＋30℃）
Atmospheric pressure: 70～106kPa
Extrude: Withstand ＞600N Axial tension
Squash: Withstand pressure 1500N/100mm
Shock: Withstand 16N·m, 3 times
Bending: The closure and connection between closure cover & base can withstand bending tension 150N, bending angel ±45°, 10 cycles.
Extrude: Withstand ＞600N Axial tension
Squash: Withstand pressure 1500N/100mm
Shock: Withstand 16N·m, 3 times
Bending: The closure and connection between closure cover & base can withstand bending tension 150N, bending angel ±45°, 10 cycles.
Easy installation for closure sealing & cable entry/exit sealing.
Reasonable design for fiber bending radius, enough fiber storage space.
Big storage space for fiber splice tray, rotary angel more than 90°, easy for installation & maintainance.
Can install grounding device and valve.
Long service life of up to 25 year.
IP standard: IP68
